黄志良,林琼斌,蔡逢煌,叶开明.双向开关型PFC变换器数字化控制研究[J].电气自动化,2015,(4):4~6
双向开关型PFC变换器数字化控制研究
A Research on Digital Control over Bidirectional Switch PFC Converters
  修订日期:2014-10-09
DOI:
中文关键词:  双向开关  维也纳PFC  MCM前馈补偿  输入电流畸变  全功率范围
英文关键词:bidirectional switch  Vienna-PFC  MCM feed-forward compensation  input current distortion  full power range
基金项目:
作者单位
黄志良 福州大学电气工程与自动化学院,福建福州 350108, 
林琼斌 福州大学电气工程与自动化学院,福建福州 350108,
浙江大学电气工程博士后流动站,浙江 310058,
漳州科华技术有限责任公司博士后科研工作站,福建 363000 
蔡逢煌 福州大学电气工程与自动化学院,福建福州 350108, 
叶开明 福州大学电气工程与自动化学院,福建福州 350108, 
摘要点击次数: 12138
全文下载次数: 6660
中文摘要:
      对一种新颖前沿的单相双向开关型AC/DC维也纳(Vienna)PFC拓扑进行研究,采用数字化前馈补偿,改善传统双环输入电流畸变问题,通过引入MCM数字前馈占空比补偿,使得系统在负载全功率范围内,输入电流波形不受电感连断续下模型差异的影响,得到了较好的PFC效果。通过理论分析,推导出MCM前馈占空比补偿的表达式,最后搭建1 kW 的Vienna-PFC样机,并验证了方案的可行性。
英文摘要:
      This paper presents a novel front-end topology of a single-phase bidirectional switch AC/DC Vienna-PFC. A digital feed-forward compensation method is adopted to solve the problem of traditional double-loop input current distortion. MCM digital feed-forward duty cycle compensation is introduced so that the input current waveform is not affected by model variance over the full power range, and a good PFC effect can be achieved. An expression of the MCM feed-forward duty cycle compensation is deduced through theoretical analysis. Finally, a 1KW prototype Vienna-PFC is constructed, and the feasibility of the scheme is verified on the platform.
查看全文  查看/发表评论  下载PDF阅读器
关闭